E10 – LVL
NEW PLANT Structural LVL E10 is available in a wide range of sectional sizes, with the added benefit of long length options.
Manufactured from 2mm thick parallel-grained spruce veneers and bonded with weather and boil-resistant phenol formaldehyde adhesive.
Certified to conform to AS/NZS 4357 Structural Laminated Veneer Lumber standards, NEW PLANT Structural LVL E10 ensures reliable performance and durability in frame and truss, lintels,etc.
| PROPERTY | EDGE(MPa) | FLAT (MPa | |
| Rigidity | MoE | 11000 | 11000 |
| Modulus of Rigidity | G | 400 | 400 |
| Bending Strength 1 | f’b | 30 | 30 |
| Tension Parallel to Grain 2 | f’t | 20 | 20 |
| Compression Perpendicular to Grain | f’c | 30 | 30 |
| Grain | f’p | 7 | 7 |
| Shear | f’s | 5 | 3 |
SPECIFICATION：
| Width (mm) | Thickness(mm) | Length Availability | |
| 35mm | 45mm | Commonly length are 3.6m, 4.2m, 4.8m, 5.4m, 6.0m. Other lengths are available by special manufacture up to 12m. | |
| 70 | √ | √ | |
| 90 | √ | √ | |
| 120 | √ | √ | |
| 140 | √ | √ | |
| 170 | √ | √ | |
| 190 | √ | √ | |
| 200 | √ | √ | |
| 240 | √ | √ | |
| 290 | √ | √ | |
| 300 | √ | √ | |
| 360 | √ | √ | |
| 400 | |||
| 450 | |||
Certification
MORE DETAILS
Veneer Thickness:
Constant through the product thickness
Joint Group:
JD4—for nails, bolts, and screws
Joints:
Scarf and/or butt jointed
Finish:
Unsanded faces, sawn edges, and arrised edges
Moisture Content:
8%-15% (at time of dispatch)
Branding:
Each piece of NEW PLANT LVL is branded at least once with the product’s name for identification and evidence of compliance with manufacturing control standards
Dimensional Tolerances:
Available on request
Straightness:
Available on request
Density:
580 kg/m³ (approximately)
Adhesive:
Phenolic—AS 2754.1
Bond:
A Bond
Storage:
Store on level bearers at maximum 1800mm centers, well clear of the ground, and cover to keep dry but allow ventilation
Source:
Plantation timber – Spruce, Radiata Pine Veneer
Treatment: H2S